If there are too many WiFi connected devices on your network this could cause congestion issues. This will cause dropouts in the signal when the device is used. If there are any dense objects such as metals between your router and TV move them to increase the signal strength.Īvoid positioning your router near any devices that produce large magnetic fields such as microwaves. The signal strength of your router and TV can be affected by the objects surrounding them. Our range of WiFi extenders can be found online by clicking here. If their positions cannot be moved then a WiFi extender may be a good option for extending the range of your WiFi network. Move the position of the TV or the router closer to each other to avoid this. If it's too far the signal will be weak and prone to dropping out. The distance from your router to your TV is important. You can then select a different name/icon pair like Cable box or Satellite TV.There are a few factors that can cause issues with your WiFi signal. Select R ename Input and press the OK button. TIP: You can rename the Antenna TV (or any Input) by pressing the "*" button on your TCL Roku remote while the tile is highlighted. Select the input tile and press the OK button to start enjoying shows from your cable subscription. The Antenna TV tile should display the input's preview (as shown below). Once you press done, it will bring you to the Home screen. Searching for channels clears the channel list and starts over. Search for channels again – in case they were expecting the TV to find more channels that it did. Tunes the first channel found other than analog 3 or 4 When the channel scan is completed, the TV will display a message indicating the number of channels found and information about editing the channel lineup.ĭone– keeps the current channel list and exits to the Antenna TV.In the next step, your TV will try to find cable channels available through your paid subscription.Scanning for channels can take several minutes. Your TCL Roku Television will begin to scan for channels.Please note: If a VCR is connected from your Cable or Satellite Receiver to your TCL Roku TV then Select Yes, channels 3 & 4 are needed. Select Start finding Channels and press the OK button on your TCL Roku remote.Power on your TCL Roku Television and from the Home Screen navigate to the Antenna TV tile, press the OK button on your TCL Roku remote.With the TV powered off, screw the coaxial cable from your Cable or Satellite Receiver on to the Coaxial input of your TCL Roku Television.You can then select a different name/icon pair like Cable box or Satellite TV. Select Rename Input and press the OK button. Tip : You can rename the AV Input (or any Input) by pressing the " *" button on your TCL Roku remote while the tile is highlighted. From the Home screen and using the TCL Roku remote, navigate to the AV Tile.Power on both your TCL Roku TV and the receiver.While the TV is powered off, connect each plug to the corresponding connector on the receiver and on the TV.Composite AV cables typically have three RCA-type plugs on each end, color coded as follows: If the best available connection on your receiver is a composite video output, you can easily plug it to the TV using an RCA cable (not provided). ![]() TIP : You can rename the HDMI Input (or any Input) by pressing the " *" button on your TCL Roku remote while the tile is highlighted.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |